Supported Platforms¶

Table of Contents

Supported Virtual Network Devices ¶

netlab supports these virtual network devices or their physical equivalents (when using external virtualization provider). If you want to use an unsupported device in a netlab-managed lab, use an unknown device or contribute a new device implementation.

Virtual network device	netlab device type
Arista vEOS	eos
Aruba AOS-CX ❗	arubacx
Cisco ASAv	asav
Cisco CSR 1000v	csr
Cisco IOSv	iosv
Cisco IOS XRv	iosxr ❗
Cisco Nexus 9300v	nxos
Cumulus Linux 4.x/5.x	cumulus
Cumulus Linux 5.0 (NVUE)	cumulus_nvue ❗
Dell OS10	dellos10
Fortinet FortiOS ❗	fortios
FRR 7.5.0	frr
Generic Linux host	linux
Juniper vMX	vmx
Juniper vPTX (vJunos EVO) ❗	vptx
Juniper vSRX 3.0	vsrx
Mikrotik RouterOS 6 (CHR)	routeros
Mikrotik RouterOS 7 (CHR) ❗	routeros7
Nokia SR Linux ❗	srlinux
Nokia SR OS ❗	sros
VyOS 1.4 ❗	vyos

Notes:

To specify the device type of a node in your virtual lab:

Specify device property in node data

nodes:
- name: c_ios
  device: iosv
- name: c_csr
  device: csr

Use defaults.device setting in lab topology

defaults:
  device: cumulus

nodes: [ s1, s2, s3 ]

See lab topology overview for more details.

Supported Virtualization Providers ¶

netlab create can generate configuration files for these virtualization providers:

vagrant-libvirt, including support for veryisolated private networks and UDP point-to-point tunnels.
Vagrant VirtualBox provider
Containerlab
External – meta virtualization provider that allows you to configure external physical or virtual devices with netlab

You cannot use all supported network devices with all virtualization providers. These are the supported combinations (use netlab show images command to display the current system settings).

Virtual network device	Vagrant Libvirt	Vagrant Virtualbox	Containerlab
Arista vEOS	✅	✅	✅
Aruba AOS-CX	✅	❌	❌
Cisco ASAv	✅	❌	❌
Cisco IOSv	✅	✅	❌
Cisco IOS XRv	✅	❌	❌
Cisco CSR 1000v	✅	✅	❌
Cisco Nexus 9300v	✅	✅	❌
Cumulus Linux	✅	✅	✅❗
Cumulus Linux 5.0 (NVUE)	✅	✅	✅❗
Dell OS10	✅	❌	✅
Fortinet FortiOS	✅	❌	❌
FRR 7.5.0	❌	❌	✅❗
Generic Linux (Ubuntu/Alpine)❗	✅	✅	✅
Juniper vMX	❌	❌	✅❗
Juniper vPTX	✅	❌	❌
Juniper vSRX 3.0	✅	✅	✅❗
Mikrotik RouterOS 6	✅	❌	❌
Mikrotik RouterOS 7	✅	❌	❌
Nokia SR Linux	❌	❌	✅
Nokia SR OS	❌	❌	✅
VyOS	✅	❌	✅❗

Note:

external provider can be used with all devices supported by netlab.

Configuration files for Virtualbox and KVM/libvirt environments specify the number of virtual CPUs and memory allocated to individual network devices. These are the default values; you can change them with node parameters.

Virtual network device	netlab device type	CPUs	memory	libvirt NIC model
Arista vEOS	eos	2	2048	virtio (libvirt default)
Aruba AOS-CX	arubacx	2	4096	virtio (libvirt default)
Cisco ASAv	asav	1	2048	virtio (libvirt default)
Cisco IOSv	iosv	1	512	e1000
Cisco IOS XRv	iosxr	2	8192	e1000
Cisco CSR 1000v	csr	2	4096	virtio (libvirt default)
Cisco Nexus 9300v	nxos	2	6144 ❗	e1000
Cumulus Linux	cumulus	2	1024	virtio (libvirt default)
Cumulus Linux 5.0 (NVUE)	cumulus_nvue	2	1024	virtio (libvirt default)
Dell OS10	dellos10	2	2048	e1000
Fortinet FortiOS	fortios	1	1024	virtio (libvirt default)
Generic Linux host	linux	1	1024	virtio (libvirt default)
Juniper vSRX 3.0	vsrx	2	4096	virtio (libvirt default)
Juniper vPTX	vptx	4	8192	virtio (libvirt default)
Mikrotik RouterOS 6	routeros	1	256	virtio (libvirt default)
Mikrotik RouterOS 7	routeros7	2	256	e1000
VyOS	vyos	2	1024	virtio (libvirt default)

Configuration Deployments ¶

Ansible playbooks included with netlab can deploy and collect device configuration on these network operating systems:

Operating system	Deploy configuration	Collect configuration
Arista EOS	✅	✅
Aruba AOS-CX	✅	❌
Cisco ASAv	✅	✅
Cisco IOS / IOS XE	✅	✅
Cisco IOS XRv	✅	✅
Cisco Nexus OS	✅	✅
Cumulus Linux	✅	✅
Dell OS10	✅	✅
Fortinet FortiOS	✅	✅
FRR container	✅	❌
Generic Linux	✅	❌
Juniper vMX	✅	✅
Juniper vSRX 3.0	✅	✅
Juniper vPTX	✅	✅
Mikrotik RouterOS 6	✅	✅
Mikrotik RouterOS 7	✅	✅
Nokia SR Linux	✅	✅
Nokia SR OS	✅	✅
VyOS	✅	✅

Initial Device Configurations ¶

The following system-wide features are configured on supported network operating systems as part of initial device configuration:

Operating system	Hostname	IPv4 hosts	LLDP	Loopback IPv4 address	Loopback IPv6 address
Arista EOS	✅	✅	✅	✅	✅
Aruba AOS-CX	✅	❌	✅	✅	✅
Cisco ASAv	✅	✅	❌	❌	❌
Cisco IOS/IOS XE	✅	✅	✅	✅	✅
Cisco IOS XRv	✅	✅	✅	✅	✅
Cisco Nexus OS	✅	✅	✅	✅	✅
Cumulus Linux	✅	✅	✅	✅	✅
Cumulus Linux 5.0 (NVUE)	✅	✅	✅	✅	✅
Dell OS10	✅	✅	✅	✅	✅
Fortinet FortiOS	✅	❌	✅	✅	✅
FRR 7.5.0	✅	✅	❌	✅	✅
Generic Linux	✅	✅	✅❗	✅	✅
Juniper vMX	✅	❌	✅	✅	✅
Juniper vPTX	✅	❌	✅	✅	✅
Juniper vSRX 3.0	✅	❌	✅	✅	✅
Mikrotik RouterOS 6	✅	✅	✅❗	✅	✅
Mikrotik RouterOS 7	✅	✅	✅❗	✅	✅
Nokia SR Linux	✅	✅	✅	✅	✅
Nokia SR OS	✅	✅	✅	✅	✅
VyOS	✅	✅	✅	✅	✅

The following interface parameters are configured on supported network operating systems as part of initial device configuration:

Operating system	Interface description	Interface bandwidth	MTU
Arista EOS	✅	✅	✅
Aruba AOS-CX	✅	❌	✅
Cisco ASAv	✅	❌	✅
Cisco IOS/IOS XE	✅	✅	✅❗
Cisco IOS XRv	✅	✅ ❗	✅
Cisco Nexus OS	✅	✅	✅
Cumulus Linux	✅	✅	✅
Cumulus Linux 5.0 (NVUE)	✅	✅	❌
Dell OS10	✅	❌	✅
Fortinet FortiOS	✅	✅	❌
FRR 7.5.0	✅	✅	✅
Generic Linux	❌	❌	✅
Juniper vMX	✅	✅	✅
Juniper vPTX	✅	✅	✅
Juniper vSRX 3.0	✅	✅	✅
Mikrotik RouterOS 6	✅	❌	✅
Mikrotik RouterOS 7	✅	❌	✅
Nokia SR Linux	✅	❌	❌
Nokia SR OS	✅	❌	❌
VyOS	✅	❌	✅

The following interface addresses are supported on various platforms:

Operating system	IPv4 addresses	IPv6 addresses	Unnumbered interfaces
Arista EOS	✅	✅	✅
Aruba AOS-CX	✅	✅	❌
Cisco ASAv	✅	✅	❌
Cisco IOS/IOS XE	✅	✅	❗
Cisco IOS XRv	✅	✅	✅
Cisco Nexus OS	✅	✅	✅
Cumulus Linux	✅	✅	✅
Cumulus Linux 5.0 (NVUE)	✅	✅	✅
Dell OS10	✅	✅	❌
Fortinet FortiOS	✅	✅	❌
FRR 7.5.0	✅	✅	❌
Generic Linux	✅	✅	❌
Juniper vMX	✅	✅	✅
Juniper vPTX	✅	✅	✅
Juniper vSRX 3.0	✅	✅	✅
Mikrotik RouterOS 6	✅	✅	❌
Mikrotik RouterOS 7	✅	✅	❌
Nokia SR Linux	✅	✅	❌
Nokia SR OS	✅	✅	✅
VyOS	✅	✅	✅

Supported Configuration Modules ¶

Routing protocol configuration modules are supported on these devices1

Operating system	OSPF	IS-IS	EIGRP	BGP	BFD	EVPN	FHRP
Arista EOS	✅	✅	❌	✅	✅	✅	✅
Aruba AOS-CX	✅	❌	❌	✅	✅	✅	✅
Cisco ASAv	❌	✅	❌	✅	❌	❌	❌
Cisco IOSv	✅	✅	✅	✅	✅	❌	✅
Cisco IOS XE	✅	✅	✅	✅	✅	❌	✅
Cisco IOS XRv	✅	✅	❌	✅	❌	❌	❌
Cisco Nexus OS	✅	✅	✅	✅	✅	✅	✅
Cumulus Linux	✅	❌	❌	✅	❌	✅	✅
Cumulus Linux 5.0 (NVUE)	✅	❌	❌	✅	❌	❌	❌
Dell OS10	❗	❌	❌	✅	✅	✅	❌
Fortinet FortiOS	❗	❌	❌	❌	❌	❌	❌
FRR 7.5.0	✅	✅	❌	✅	❌	✅	❌
Juniper vMX	✅	✅	❌	✅	✅	❌	❌
Juniper vPTX	✅	✅	❌	✅	✅	❌	❌
Juniper vSRX 3.0	✅	✅	❌	✅	✅	❌	❌
Mikrotik RouterOS 6	✅	❌	❌	✅	✅	❌	❌
Mikrotik RouterOS 7	✅	❌	❌	✅	✅	❌	❌
Nokia SR Linux	✅	✅	❌	✅	✅	✅	✅
Nokia SR OS	✅	✅	❌	✅	✅	✅	✅
VyOS	✅	✅	❌	✅	✅	✅	❌

Notes:

FRHP = First-Hop Redundancy Protocol (anycast gateway or VRRP)

The following data plane configuration modules are supported on these devices1:

Operating system	VLAN	VRF	VXLAN	MPLS	SR-MPLS	SRv6
Arista EOS	✅	✅	✅	✅	✅	❌
Aruba AOS-CX	✅	✅	✅	❗	❌	❌
Cisco IOSv	✅	✅	❌	✅	❌	❌
Cisco IOS XE	✅	✅	✅	✅	✅	❌
Cisco Nexus OS	✅	✅	✅	❌	❌	❌
Cumulus Linux	✅	✅	✅	❌	❌	❌
Cumulus Linux 5.0 (NVUE)	❌	❗	❌	❌	❌	❌
Dell OS10	✅	✅	✅	❌	❌	❌
Juniper vMX	✅	✅	❌	✅	✅	❌
Juniper vPTX	✅	✅	❌	✅	✅	❌
Juniper vSRX 3.0	❌	✅	❌	❌	✅	❌
Mikrotik RouterOS 6	✅	✅	❌	✅	❌	❌
Mikrotik RouterOS 7	✅	✅	❌	✅	❌	❌
Nokia SR Linux	✅	❌	❌	❌	✅	❌
Nokia SR OS	❌	❌	❌	❌	✅	✅
VyOS	✅	✅	✅	✅	❌	❌

IPv6 Support ¶

Core netlab functionality and all multi-protocol routing protocol configuration modules fully supports IPv6. OSPFv3 is implemented only on some platforms.

Operating system	IPv6 addresses	OSPFv3	IS-IS MT	EIGRP IPv6 AF	BGP IPv6 AF	SR-MPLS
Arista EOS	✅	✅	✅	❌	✅	✅
Aruba AOS-CX	✅	✅	❌	❌	✅	❌
Cisco ASAv	✅	❌	✅	❌	✅	❌
Cisco IOSv	✅	✅	✅	✅	✅	❌
Cisco IOS XE	✅	✅	✅	✅	✅	❌
Cisco Nexus OS	✅	❌	✅	✅	✅	❌
Cumulus Linux	✅	❌	✅	❌	✅	❌
Cumulus Linux 5.0 (NVUE)	✅	❌	✅	❌	✅	❌
Dell OS10	✅	✅	❌	❌	✅	❌
Fortinet FortiOS	✅	❌	❌	❌	❌	❌
FRR 7.5.0	✅	✅	✅	❌	✅	❌
Generic Linux	✅	❌	❌	❌	❌	❌
Juniper vMX	✅	✅	✅	❌	✅	❌
Juniper vPTX	✅	✅	✅	❌	✅	❌
Juniper vSRX 3.0	✅	✅	✅	❌	✅	❌
Mikrotik RouterOS 6	✅	❌	❌	❌	✅	❌
Mikrotik RouterOS 7	✅	✅	❌	❌	✅	❌
Nokia SR Linux	✅	❌	❌	❌	✅	✅
Nokia SR OS	✅	❌	❌	❌	✅	✅
VyOS	✅	✅	✅	❌	✅	❌

Unknown Devices ¶

You can use device type unknown to add unsupported devices to a netlab-managed virtual lab. netlab assumes an unknown device supports all configuration modules and will prepare the data structures and Ansible inventory you need to configure the device.

Unknown devices are placed in the unprovisioned group and are not configured by the netlab up or netlab initial commands.

To add an unknown device to a lab:

Set device node attribute to unknown.
Specify Vagrant box name or container name with image node attribute.
Specify clab.kind node attribute according to containerlab documentation when using containerlab virtualization provider.

1(1,2): Use netlab show module-support command to display the current system settings

Supported Platforms¶

Supported Virtual Network Devices¶

Supported Virtualization Providers¶

Configuration Deployments¶

Initial Device Configurations¶

Supported Configuration Modules¶

IPv6 Support¶

Unknown Devices¶